I created a directory called C: Essentials Only Full Version. Once the board has an application loaded, that application will start immediately on power-up. Enable the USB checkbox. AN FLoating point calculations. You first need to download and install the Qt 4.
|Date Added:||13 August 2015|
|File Size:||24.9 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The application should now look similar to this:. Haven’t received registration validation E-mail? Build and run this project for the command line only version of the host PC bootloader software. The web interface data files do not also need to be upgraded when a firmware upgrade is applied, but this is recommended in order to access new and improved functionality. When completed, the status bar should show “Write complete Flash Now you should connect the PC bootloader application to the sensor.
Updating the firmware is a potentially risky process. See here for more information. The Anui writes until address 0x while the Ancl writes until 0x0CE80, meaning an entire piece of the firmware is lost. An131u0i you use the download URLs listed in step 1 of the readme. Essentials Only Full Version. The comm port used by your serial cable, and the baud rate to use to connect to the board. Strangely now, the an1310ii project now seems to run OK. Once the board has an application loaded, that application will start immediately on power-up.
Then, load the new firmware into the application using the “open” menu. Thanks for an131ui reply. Writing new firmware Now you should connect the PC bootloader application to the sensor.
To fix this, one can either set an array as static, or allocate memory to it. The Bootload project should still fully compile if this was the only issue listed. Push the button next to the programming header while the green LED on the sensor is lit.
AN1310 PIC bootloader
To use them, download the zip file and then extract its contents into a directory, anywhere. The errors I get are: This document describes the process of flashing the devices with updated firmware. When opening a project in Qt Creator for the first time, there might be an option to use ‘Shadow Build’, and you can later see it under the “Projects” mode after opening the project.
The board is delivered pre-programmed with the Microchip Bootloader, a simple serial port based bootloader as described by the application note AN OK, so if we need 4. Everything wn1310ui now and runs OK, and we can do changes.
What is ? info
Thanks for all your help – now we can quote on the changes. I have gotten as far as getting QextSerialPort and Bootloader projects to pass.
I found that userguide a bit confusing, so I will explain the use of the bootloader in — I hope! I’m having trouble compiling projects in AN “PC software” folder. Forums Posts Latest Posts. Please refer to the Connection Guide for details of the cable and driver installation. The settings dialog is selected by clicking on the Program Icon followed by Settings. Once you have opened your projects.